Stainless Wölfin 3/4x24

OVERVIEW:

Designed for large .50 caliber projectiles, the Wölfin excels at recoil reduction through a larger, fully cut first chamber to create a curtain of gas for horizontal stability, while the front two cuts primarily vent upwards, pushing the muzzle down. The groove on top, between the chambers, assits with clocking the device accurately. This device also comes standard with your choice of black or stainless jamnut. Flats fit a 7/8" wrench.

SPECS:

MilSpec 416 Stainless, from a local supplier

3.3 Ounces

2.5" Length

1" O.D.

.53125" Thru hole, to fit up to .5" projectiles. 

2 x .5" reliefs, for horizontal recoil reduction.

4 x .25" Front brake ports, terminating slightly below the device's center-line to prevent prone dust up and maximize vertical recoil reduction.